Huawei Mediapad M5 Pro 10.8 inch tablet was released in February 2018. It was a time when bootloader unlock was allowed by Huawei. Later in July Huawei closed the bootloader unlock program but users were able to unlock the bootloader using our paid service. But Huawei went one step ahead and started updating devices with new encryption which made it impossible to generate codes even by paid services. But now the solution is available for this problem.

This firmware can be used for the following service

Bootloader/FRP/Huawei ID 

• Bootloader unlock service
• FRP/Huawei ID unlock service

Download Links:

1. CMR-AL19 for C432 only ( password=ministryofsolutions.com )
2. CMR-AL09 for C432 only ( password=ministryofsolutions.com )
3. Try on other versions at your own risk

Supported Security Patch level:

• This downgrade was tested up to the September 2018 patch level, for higher versions try at your own risk.

How to install:

• Backup all important data from the tablet
• Download firmware on your computer (Important)
• Charge battery up to 40%
• Get an SD card with a minimum of 8GB of free space
• Format sd card in exFAT format (Important).
• Extract downloaded firmware and copy the dload folder to your micro sd card
• Insert card in tablet dial *#*#2846579#*#* then tap on software upgrade>sd card update
• Installation should start, after successful installation tablet will perform factory reset.

Warning! You try at your risk, we are not responsible for any damages to your device