Huawei Mediapad M5 Pro CMR-AL09 is an amazing tablet released in 2018. This tablet is equipped with Kirin 960 and a 10.8-inch screen size. This tablet was running EMUI8 out of the box and now it has been upgraded to EMUI9 for the Middle Eastern region. If your tablet is not working well or bricked after an automatic upgrade, then you may need to install the firmware again. In this post, we will share the stock firmware of this tablet. This firmware is only intended to be used on devices with cust version C185.

Photo credit@Andrej Lišakov

Huawei Mediapad M5 Pro Firmware Details:

• Android Version: 9.0
• EMUI Version: 9.0
• Build Number: CMR-AL09 9.0.1.191(C185E3R1P3T8)
• Supported Model: CMR-AL09 (Middle East)
• Update Type: Official Stock Firmware
• Download Link: Click Here
• File Password=https://ministryofsolutions.com CMRAL09
• Use the internet download manager for fast download speed

Installation Guide

• Backup all important data from the tablet
• Charge the battery up to 50%
• Get a micro SD card with 5GB of free space
• Extract the downloaded firmware zip file (password=https://ministryofsolutions.com CMRAL09)
• Insert SD card in the tablet
• Then copy the dload folder to your SD card
• Dial *#*#2846579#*#* then tap on software upgrade >sd card update and the update should start
• If the code does not work, then power off the phone and disconnect from pc. Hold volume up, volume down, and power, keep holding until the update starts.

Note: Everything you do at your responsibility, this guide is provided for free without any guarantee.