Huawei Mate 10 Pro BLA-L29 Oreo firmware for the Asian variant is now available at the Ministry of Solutions. This is the official stock firmware version 143. This firmware can be installed using an OTG/SD card or any 3rd party flashing tool. This firmware could not be used to downgrade phones from Android 9. If your phone got bricked while it was running Oreo then you can use this firmware to unbrick. This firmware should be only used on devices with cust version C636. If you use it on other cust version your phone may hard brick.

Firmware Details:

• Android Version: 8.0
• EMUI Version: 8.0
• Security Patch Level: July 2018
• Downgrade support: Only Android 8
• Build Number: BLA-L29 8.0.0.143 (C636)
• Supported Model: BLA-L29C636 (Asia Pacific)
• Update Type: Official Stock Firmware
• Download Link: Click Here
• Password=ministryofsolutions.com

Installation Guide

• Backup all important data from the phone
• Charge the battery up to 50%
• Get an OTG USB drive with 6GB of free space
• Format USB in exFAT format
• Extract the downloaded firmware zip file
• Then copy the dload folder to your USB drive
• Connect the USB to the phone using the OTG connector
• Dial *#*#2846579#*#* then tap on software upgrade >sd card update and update should start
• If the code does not work, then power off the phone and disconnect from pc. Hold volume up, volume down, and power, keep holding until the update starts.