Huawei P30 ELE-AL00 Android 10 EMUI10 Official Firmware
Huawei P30 ELE-AL00 has been upgraded to EMUI10. In this post, we will share the official stock firmware for this phone. The firmware version is ELE-AL00B 10.0.0.185(C00E85R1P11). This could be helpful if your device boot loop after an automatic upgrade and may fix other software-related problems. You can install it in an official way using OTG USB or by any 3rd party tools.
Huawei P30 Firmware Details:
- Android Version: 10 (Q)
- EMUI Version: 10
- Build Number: ELE-AL00B 10.0.0.185(C00E85R1P11)
- Supported Model: ELE-AL00(Chinese)
- Update Type: Official Stock Firmware
- Download Link: Click Here
- Password=ministryofsolutions.com ELE10
- Tip: use internet download manager for faster speed
Installation Guide
- Backup all important data from the phone
- Charge the battery up to 50%
- Get a USB OTG with 8GB of free space
- Extract the downloaded firmware zip file
- Then copy the dload folder to your USB
- Connect USB with phone
- Then power off the phone and disconnect from pc. Hold volume up, volume down, and power, keep holding until the update starts.
- For EMUI10, power off the phone then Hold the volume up and connect with pc, Erecovery will appear
- Connect the OTG drive with the phone or card should be inside the phone
- tap on update mode > OTG update/ sd card update
- If it does not work use any 3rd party tool to flash your phone
Note: Everything you do at your responsibility, this guide is provided for free without any guarantee.
![[Official] Huawei bootloader unlock tool](https://i0.wp.com/ministryofsolutions.com/wp-content/uploads/2016/09/Huawei2BLogo.jpg?fit=200%2C200&ssl=1&resize=40%2C40){kind=small}
Is this a Chinese ROM or Global ROM?? I’m looking for global ROM for Chinese handset. Thanks in advance.
Jaffer
Firmware details are written clearly
mot pass svp
Enter password without “”
sa ne fonctionne pas Ministryofsolutions.com ELE10
sa fonctionne merci mais vraiment ils faut être très intelligent