Now you can root Huawei Y9 Prime 2019 by following the guide given. Before proceeding keep in mind that you will lose the warranty of your phone by unlocking the bootloader and bootloader unlock is not free. So you have to pay for the unlock and you are not given any code for the bootloader. It’s directly unlocked through a USB cable. At this moment only EMUI9.1 can be rooted because Huawei has permanently blocked the bootloader in EMUI10. If you have already upgraded to EMUI10 then you need to roll back to EMUI9.1 using hisuite.

Disclaimer

• You try everything at your own risk
• This method has been tested on STK-LX1 and should work for other models running EMUI9.1
• You will lose the warranty of your phone by rooting it

Huawei Y9 Prime Rooting Guide (updated 18-08-2022):

• Backup all important data from the phone
• Unlock the bootloader of your phone (click here to buy service)
• Download the root file from THIS LINK (password:https://ministryofsolutions.com)
• Install the magisk manager apk given in the zip file
• After that connect the phone in fastboot mode and open the extracted folder, double click MAF32.exe
• Then type ” fastboot flash recovery_ramdisk magisk_patched-23000.img ”  and press enter
• After successful flash disconnect the phone from pc
• Hold the volume up and power, and keep holding both buttons until a screen appears with the message ” your device is booting now”
• Connect to wifi and open magisk manager, If it asks you to install Environmental fix press “OK” Don’t press cancel verify it says magisk 23.00 is installed (do not update magisk)
• In the Magisk app, settings disable the check update option
• Install root checker and verify root
• If you don’t hold the volume up and power it at the start, then the phone will start without root access. (After fixing SafetyNet you don’t need to do this)
• The phone must be disconnected from the cable when you start it by holding the volume up and power

Fix SafetyNet:

• Open magisk settings and Disable magisk check-update
• Enable magisk hide
• Tap 2 times on systemless hosts
• Go to the magisk modules section
• Search and install ” magiskhide prop config “don’t reboot, go back.
• Again search and install “Riru” module. and then reboot the phone.
• Download SafetyNet fix v2.1.3 module and install it in Magisk Download Link.
• Reboot Phone
• Go to magisk hide settings and tick google play service
• check SafetyNet in magisk
• Profit
• Make sure you disable automatic updates in developer options to stop the phone from installing new updates.

Note: If you cannot root your phone then You can use our paid service and we will root remotely.

Note: never install OTA after root, and do not factory reset while the phone is rooted

Video Tutorial