In October 2022, Huawei unveiled the Huawei Nova 10 SE smartphone, which is a smartphone that fits into the mid-range category. The phone features a 6.67-inch OLED display with a 90Hz refresh rate, a Qualcomm Snapdragon 680G processor, as well as 6GB or 8GB of RAM, 128GB or 256GB of storage, and a triple camera setup on its back, which consists of a 108-megapixel main sensor, an 8-megapixel ultra-wide sensor, and a 2-megapixel macro sensor. Nova 10 SE comes with a powerful 4500mAh battery which is powered by a fast charging technology that supports 66W power output. We are sharing Official stock firmware for BNE-AL00 based on HarmonyOS 2.

👉Also check: Huawei Nova 10 SE Convert to Chinese

Huawei Nova 10 SE Firmware Details:

• Android Version: 11
• Harmony Version: HarmonyOS 2
• Build Number: BNE-AL00 102.0.1.150 (C00E150R6P2)
• Supported Model: BNE-AL00 (Dual Sim-Chinese)
• Update Type: Official Stock Firmware
• Download Link: Click Here
• File Password=BNEAL00 https://ministryofsolutions.com
• Note: for faster download speed use the Internet download manager
• Note: Always copy and paste the password, and always use a computer to extract the files.

Installation Guide:

• Backup all important data from the phone
• Charge the battery up to 50%
• Get a USB OTG drive with 8GB of free space
• Extract the downloaded firmware zip file (password=BNEAL00 https://ministryofsolutions.com)
• Then copy the dload folder to the USB drive
• Connect OTG drive with the phone
• Power off the phone, hold the volume up and power, and keep holding until appears recovery mode, Tap on update mode then tap on OTG Update.

Note: Everything you do at your responsibility, this guide is provided for free