Huawei Mate 20 Pro LYA-AL00 has been upgraded to EMUI10. Android 10 is included in this upgrade. In this post, we will share the official stock firmware for this phone. The firmware version is LYA-AL00 10.0.0.185(C00E74R3P8). This could be helpful if your device got bricked and bootloop after an automatic upgrade and may fix other software-related problems. You can install it through the official way using OTG USB or by any 3rd party tools.

Huawei Mate 20 Pro Firmware Details:

• Android Version: 10 (Q)
• EMUI Version: 10
• Build Number:LYA-AL00 10.0.0.185(C00E74R3P8)
• Supported Model: LYA-AL00 (Chinese)
• Update Type: Official Stock Firmware
• Download Link: Click Here
• Password=ministryofsolutions.com LYAAL00
• Tip: use the internet download manager for faster speed

Installation Guide

• Backup all important data from the phone
• Charge the battery up to 50%
• Get a USB OTG with 8GB of free space
• Extract the downloaded firmware zip file
• Then copy the dload folder to your USB
• Connect USB with phone
• Then power off the phone and disconnect from pc. Hold volume up, volume down, and power, keep holding until the update starts.
• For EMUI10, power off the phone then Hold the volume up and connect with pc, Erecovery will appear
• Connect the OTG drive with the phone or the card should be inside the phone
• tap on update mode > OTG update/SD card update
• If it does not work use any 3rd party tool to flash your phone

Note: Everything you do at your responsibility, this guide is provided for free without any guarantee.