Huawei P10 Plus still performing really well in 2022. Kirin 960 chip is used in this phone which is better than many new low-range CPUs used in phones. Since the closure of the free bootloader unlock code service by Huawei, users are struggling to root this phone. Now we are providing a bootloader code service for this phone which allows users to root this phone. We are sharing a detailed free rooting guide for this model. Keep in mind bootloader unlock is still mandatory to gain root access.

Disclaimer

• You are responsible for anything you do with your phone
• This method has been tested on P10 Plus VKY-L29 and should work for other models running EMUI9.1
• You cannot factory reset/Update the phone when rooted, , must unroot by flashing stock recovery and then factory reset if needed.
• You will lose the warranty on your phone by rooting it

Huawei P10 Plus Rooting Guide:

• Backup all important data from the phone
• Unlock the bootloader of your phone (click here to buy service)
• Download the root file from THIS LINK (password:ministryofsolutions.com)
• Install the magic manager APK given in the zip file
• After that, connect the phone in fastboot mode and open the extracted folder, double click MAF32.exe
• Then type ” fastboot flash recovery_ramdisk magisk_patched-23.img ”  and press enter
• After a successful flash disconnect the phone from the PC
• Hold the volume up and Power buttons simultaneously, and keep holding both buttons until a screen appears with the message ” your device is booting now”
• Connect to wifi and open magisk manager, If it asks you to install an additional setup fix press “OK” Don’t press cancel verify it says Magisk 23.00 is installed (do not update Magisk)
• In the Magisk app, settings disable the check update option
• Install root checker and verify root
• If you don’t hold the volume up and power buttons at the start, then the phone will start without root access. (After fixing SafetyNet you don’t need to do this)
• The phone must be disconnected from the cable when you start it by holding the volume up and power

Fix SafetyNet:

• Copy Riru and SafetyNet Fix module on your phone storage.
• Open magisk settings and Disable magisk check-update
• Enable magisk hide
• Tap 2 times on systemless hosts
• Go to the magic modules section
• Search and install ” magiskhide prop config “don’t reboot, go back.
• Tap to install from storage, and select “Riru” module. Don’t reboot
• Again tap on Install from storage and select SafetyNet fix v2.1.3 module and install it.
• Reboot Phone
• Go to magisk hide settings and tick google play service
• check SafetyNet in magisk
• Profit 
• Make sure you disable automatic updates in developer options to stop the phone from installing new updates.