How To Configure TP Link WA5210G Outdoor Access Point
 |
| How To Configure TP Link WA5210G Outdoor Access Point |
Here is step by step guide to configure TP Link IL-WA5210G outdoor access point
1. connect it to your computer’s lan port
right click on network icon and click open network & sharing center,
see image below
 |
| How To Configure TP Link WA5210G Outdoor Access Point |
2. in next windows click on your Ethernet connection. see image below
 |
| How To Configure TP Link WA5210G Outdoor Access Point |
3. a new windows will open click on properties button, see image below
 |
| How To Configure TP Link WA5210G Outdoor Access Point |
4. after that you will see one more window, scroll down , click on internet protocol IPv4, then click properties,
see image
 |
| How To Configure TP Link WA5210G Outdoor Access Point |
5. again a new windows should open , and here you have to chose ” use the following IP address” and enter ip 192.168.1.2, hit tab button on keyboard and then click ok, close all windows.
 |
| How To Configure TP Link WA5210G Outdoor Access Point |
6. open your browser and enter in address bar . 192.168.1.254, and it will ask for user name password
 |
| How To Configure TP Link WA5210G Outdoor Access Point |
7. enter username: admin , Password: admin, and you will see welcome screen of access point interface, in left sife menu, click on quick setup.
 |
| How To Configure TP Link WA5210G Outdoor Access Point |
8. on next page you will be asked for country/region , and acceptance of terms & conditions. as shown in image below
 |
| How To Configure TP Link WA5210G Outdoor Access Point |
9. tick i agree & click login, on next page you will be asked about the device role, choose as per your requirement , i am connecting it as access point
|
| How To Configure TP Link WA5210G Outdoor Access Point |
10. click next and your browser windows should refresh in few seconds, following message will be shown,
 |
| How To Configure TP Link WA5210G Outdoor Access Point |
11. once page refreshed, set your network security , by clicking wireless in left menu and then chose security settings, see in image below
 |
| How To Configure TP Link WA5210G Outdoor Access Point |
chose wpa-psk/wpa2-psk and enter your desired wifi password in PSK passphrase .
click on save and then it will ask you to restart the device,
restart device to save settings,
you are done.
![[Official] Huawei bootloader unlock tool](https://i0.wp.com/ministryofsolutions.com/wp-content/uploads/2016/09/Huawei2BLogo.jpg?fit=200%2C200&ssl=1&resize=40%2C40){kind=small}
I want to connect it as a client router mode.my root router ip 192.168.3.1 and subnet 255.255.255.0.how configure client router
Configure default gateway 192.168.3.1 and assign ip 192.168.3.2, rest of settings remain same