Lineage is one of the most famous GSI ROMs. Many Android users believe that their phones perform better with LineageOS installed on the phone. Because Lineage is considered a very slim ROM all Google services are removed from it. Users can still flash GAPPS in this ROM, but many users prefer to use it without Google apps. In this tutorial, we will guide you on how you can install LineageOS on your Huawei Mate 10 Pro.

Huawei Mate 10 Pro Lineage Screens:

Disclaimer:

• Everything you do with your phone is your own responsibility, we are not responsible for your mistakes
• Basic functions call/camera/messages, etc. Tested by us, but if there is any bug we cannot resolve it.
• By unlocking the bootloader, you will lose the warranty.

Huawei Mate 10 Pro Android 11 Installation Guide:

• This guide is only for Devices running EMUI9.1/EMUI9.0
• You must have a USB OTG connector and USB flash drive with 8Gb free storage.
• Backup all important data on your phone (Hisuite doesn’t work with custom ROM), use another method
• If you don’t have a bootloader unlock code, buy code 1st (click here)
• Download ROM from this link: Click Here (Make sure you download 18.1 ARM64 bvS version)
• Download other required Files from THIS LINK
• Extract the zip file (password=ministryofsolutions.com)
• Also, extract the ROM file and copy it to the same folder where you have extracted the ROM installation files
• Copy Gapps zip and lineage rom img file to a USB flash drive
• Connect the phone in fastboot mode, then open MAF32.exe and flash TWRP (command example=fastboot flash recovery_ramdisk recovery-3.3.1-0-e.img) TWRP credit
• Disconnect the phone from PC and hold the volume up and power buttons, Keep holding until TWRP recovery appears.
• Now connect the USB flash drive to the phone
• Tap on Reboot and then tap on Recovery, the phone will restart to TWRP mode again
• Now tap on, wipe >advanced wipe then tick only system partition and swipe to wipe
• Then go back to the main menu of TWRP
• Tap on install > Tap on install image > Tap on Select Storage > choose OTG Drive
• Now tap on the Lineage image file and then select system_image partition to install
• Swipe to install, and wait for the installation to complete.
• If you don’t want to install GAPPS, you can reboot the phone if you want to install GAPPS please continue
• Go back to the main menu of TWRP
• Tap on wipe>advanced wipe>select system partition >tap on Repair or change file system > Resize File System and swipe to resize, if any error appears, repeat resize operation.
• Go back to the main menu of TWRP and now flash GAPPS zip
• Then go back to the main menu of TWRP and tap on reboot > Bootloader
• The phone will enter fastboot mode again and you should flash stock recovery with flash command ( fastboot flash recovery_ramdisk RECOVERY_RAMDISk.img ) and press enter
• Once stock recovery is flashed, disconnect the phone from the PC and hold the volume up + power button, keep holding until stock recovery appears.
• Wipe data factory reset and then reboot
• The lineage will boot (1st boot may take some time)

Note: Those who want to root the lineage, only install the superuser app from Fdroid. and if you need Magisk, it may not work, but you can try the Magisk version from THIS LINK.