[Solved]Motorola Razr M XT907 Black Screen With Green Light

One of my friend who have Motorola Razr M XT907 Verizon, suddenly died. it stopped responding to all actions. I tried to connect with PC , but it doesn’t show anything on PC, only green light was there.

Motorolla-XT907-Stuck-on-boot.jpg

Motorola XT907 Bricked

Solution

  • As this phone was not getting detected by PC, so my 1st guess was battery is completely drained.
  • i connected it to wall charger (Don’t use computer USB), green notification light came up, and i left it their on charge for an hour.
  • After an hour i checked and green light was turned off, i disconnected phone from charger and tried to turn it on. and yes it started, but stuck on red eye, as shown in image below.
Motorolla-XT907-Stuck-on-boot-2.jpg

Motorola XT907 Bricked

  • But at this moment i was able to see it on PC, it was correctly recognized by PC.
  • I tried to turn off, but it was boot looping, so what i did, pressed volume down & power (force restart) as soon as screen turned off, i quickly switched to volume up & power held it for few seconds. and it stayed off.
  • Then again, i connected to wall charger, it booted automatically and after few seconds it went to charging screen, and i left it on charging for almost 1 hour, and battery increased to 80%.
  • Then removed it from from charger, pressed and hold (volume up, volume down + power) until boot mode menu appeared, and selected recovery to check which version this phone is running. and it was running KDA20.62-15.1. as you can see in following image.
Motorolla-XT907-Stuck-on-boot-3.jpg

Motorola XT907 Bricked

  • Downloaded firmware which was already installed from THIS LINK
  • If you try to install another firmware, it will not work, so you have to download version which is already installed.
  • Then download Latest RSD Lite from official Motorola website. and install it.
  • Again enter boot mode menu, and select AP bootloader and connect it with PC, phone screen will look like this
Motorolla-XT907-Stuck-on-boot-4.jpg

Motorola XT907 Bricked

  • Now extract downloaded firmware and open RSD lite, click 3 dots button and select XML file inside extracted folder.
  • If your phone is detected properly it will be showing in list as fastboot device.
  • now click start, and flashing should start, as shown in image below.
Motorolla-XT907-Stuck-on-boot-7.jpg

Motorola XT907 Flashing

  • It will take like 20 minutes to complete, don’t disconnect untill it finished. for me it gave error when flashing system.img, but i tried again and 2nd it was successful.
  • On successful flashing, phone will restart , don’t disconnect it now, let it boot completely until you see startup wizard. and you are done.
Motorolla-XT907-Stuck-on-boot-5.jpg

Motorola XT907 unbricked

Motorolla-XT907-Stuck-on-boot-6.jpg

Motorola XT907 unbricked

Mutahhar Bashir

Passionate blogger, have excellent problem solving skills, quick learner, love to accomplish difficult tasks, improving my skills while helping others through this blog.

You may also like...

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Discover more from Ministry Of Solutions

Subscribe now to keep reading and get access to the full archive.

Continue reading

Need to Know more?
Scan the code